Unnamed STDTSFLib.xsd STDTSFLib.xml ATMLDemo4TSFLib.xsd ATMLDemo4TSFLib.xml 0 0 Connect cable BNC-1 between port U6 IN on the UUT and Channel 2 of the Waveform Generator\nConnect cable BNC-2 between port U7 OUT on the UUT and Channel 2 of the Oscilloscope\nConnect cable BNC-3 from the ATEC bench to Channel 1 of the Waveform Generator\nConnect cable HARNESS-1 from DSUB1 on the UUT to Dyn1 on the ATEC bench\nEnsure all UUT Switches are set to ON, except SW3 and SW11 which must be OFF Instance Test for Step with overrides DSUB1-14 DSUB1-2 Verify the LED on the UUT is lit green OK OK Instance Test for Step with overrides OK OK 0 0 1 Instance Test for Step with overrides DSUB1-3 DSUB1-2 Set 50 OHM for the input impedance of the Oscilloscope\nTurn SW11 ON 0.5 MHz 1.0 MHz 1.5 MHz 2.0 MHz 2.5 MHz 3.0 MHz 3.5 MHz 4.0 MHz 4.5 MHz 5.0 MHz Instance Test for Step with overrides Swap over the cables BNC-1 and BNC-2 on the UUT end (Ports U6 IN and U7 OUT on the UUT)\n(BNC-1 should now connect UUT port U7 OUT to Channel 2 of the Waveform Generator)\n(BNC-2 should now connect UUT port U6 IN to Channel 2 of the Oscilloscope)\nSet 50 OHM for the input impedance of the Oscilloscope 0.5 MHz 1.0 MHz 1.5 MHz 2.0 MHz 2.5 MHz 3.0 MHz 3.5 MHz 4.0 MHz 4.5 MHz 5.0 MHz Instance Test for Step with overrides If necessary swap the BNC-1 and BNC-2 cables to ensure that they connected as follows:\n\tBNC-1 connects UUT port U6 IN to Channel 2 of the Waveform Generator\n\tBNC-2 connects UUT port U7 OUT to Channel 2 of the Oscilloscope\nSet 50 OHM for the input impedance of the Oscilloscope Conditional action based on measured value. Limit from Test Parameter. Conditional action based on measured value. Limit from Test Parameter. Instance Test for Step with overrides Instance Test for Step with overrides Instance Test for Step with overrides Instance Test for Step with overrides Instance Test for Step with overrides 0 0 Instance Test for Step with overrides DSUB1-7 DSUB1-2 0 0 1 Instance Test for Step with overrides DSUB1-7 DSUB1-2 0 0 1 Instance Test for Step with overrides DSUB1-21 DSUB1-2 Instance Test for Step with overrides DSUB1-21 DSUB1-2 0 0 1 Q1.C.SR Instance Test for Step with overrides DSUB1-22 DSUB1-2 Instance Test for Step with overrides DSUB1-22 DSUB1-2 Wrapper Test Group for Test Vcc_Resistance_Test Wrapper parameter for Vcc_Resistance_Test.Cnx_Pos Wrapper parameter for Vcc_Resistance_Test.Cnx_Neg Step of Wrapper Test Group, calling Test Vcc_Resistance_Test Wrapper Test Group for Test Apply_DC_Power Wrapper parameter for Apply_DC_Power.dcAmpl Wrapper parameter for Apply_DC_Power.acAmpl Wrapper parameter for Apply_DC_Power.currLmt OK Step of Wrapper Test Group, calling Test Apply_DC_Power Wrapper Test Group for Test Vo_Voltage_Test Wrapper parameter for Vo_Voltage_Test.Cnx_Pos Wrapper parameter for Vo_Voltage_Test.Cnx_Neg Step of Wrapper Test Group, calling Test Vo_Voltage_Test Wrapper Test Group for Test Gain_Control_Test Wrapper parameter for Gain_Control_Test.currLmt Step of Wrapper Test Group, calling Test Gain_Control_Test Wrapper Test Group for Test Isolation_Gain_Test Wrapper parameter for Isolation_Gain_Test.currLmt Step of Wrapper Test Group, calling Test Isolation_Gain_Test Wrapper Test Group for Test RF_Amplifier_1dB_Compression_Test Wrapper parameter for RF_Amplifier_1dB_Compression_Test.srcFreq Wrapper parameter for RF_Amplifier_1dB_Compression_Test.nomFreq Wrapper parameter for RF_Amplifier_1dB_Compression_Test.Measured_Gain Step of Wrapper Test Group, calling Test RF_Amplifier_1dB_Compression_Test Wrapper Test Group for Test Vc_DC_Voltage_Test Wrapper parameter for Vc_DC_Voltage_Test.Cnx_Pos Wrapper parameter for Vc_DC_Voltage_Test.Cnx_Neg Step of Wrapper Test Group, calling Test Vc_DC_Voltage_Test Wrapper Test Group for Test Vc_AC_Voltage_Test Wrapper parameter for Vc_AC_Voltage_Test.Cnx_Pos Wrapper parameter for Vc_AC_Voltage_Test.Cnx_Neg Step of Wrapper Test Group, calling Test Vc_AC_Voltage_Test Wrapper Test Group for Test Ve_DC_Voltage_Test Wrapper parameter for Ve_DC_Voltage_Test.Cnx_Pos Wrapper parameter for Ve_DC_Voltage_Test.Cnx_Neg Step of Wrapper Test Group, calling Test Ve_DC_Voltage_Test Wrapper Test Group for Test Vb_DC_Voltage_Test Q1.C.SR Wrapper parameter for Vb_DC_Voltage_Test.Cnx_Pos Wrapper parameter for Vb_DC_Voltage_Test.Cnx_Neg Step of Wrapper Test Group, calling Test Vb_DC_Voltage_Test